Honeywell CT230-GA Guia De Instalacion página 7

CT230-GA / CT230-GB
If not already done, affix the provided terminal sticker to the
wallplate.
Insert the wires (non-included) through one of the two openings on
Sticker
the wallplate and connect the CT230 linked units together in a
daisy-chain configuration (see connection diagram on page 7).
Reinstall the faceplate on the wall plate and tighten the screw.
Access the ON/OFF switch by sliding the CT230 door upwards
and place the CT230 linked unit on OFF.
Door
Switch
5