D.COntrol Panel; Using The Processor - Cuisinart BFP603E Manual De Instrucciones

D. Control Panel
ON/OFF
(HIGH): Purée
(LOW): Chop, slice, grate
(ICE CRUSH): emulsify
(PULSE)
PULSE
I. HIGH , LOW and ICE CRUSH
the switch will begin to flash indicating that the
appliance is in 'stand-by' mode.
press once to activate the appliance.
while the processor is running.
running. Simply press the desired speed button.
currently in use.
II. The PULSE button
obtain more accurate results.
indicator light will begin to flash indicating that the
appliance is in 'stand-by' mode. Press the
the indicator light will start to flash indicating that
this function has been activated.
desired speed. Repeat as often as desired.
30
E. Using the Processor
I. Chopping or puréeing
To chop food like onions finely, use the chopping blade
and follow the instructions below:
feed tube.
you start with short bursts using the pulse function,
making sure that the food falls to the bottom of the
bowl after each pulse (see section 3D II).
speeds
processed too long.
appliance during use so as to steady the appliance.
sides of the bowl, if necessary.
To chop fresh and aromatic herbs, use the chopping
blade and follow the instructions below:
and dry.
tender parts of the plant.
power until the herbs are chopped enough. If they
are properly dried after chopping, the aromatic
herbs can be preserved in the refrigerator for 4 or 5
days.
button, To chop meat, chicken, fish and shellfish, use the
PULSE
chopping blade and follow the instructions below:
for a few seconds. Turn the appliance off and when
the motor has stopped use a spatula to scrape food
from the sides of the bowl if necessary.