Power Supply Connection - Eneo VKCD-1322 Instrucciones De Instalación Y Manejo

6 Power Supply Connection

• Connect the video out jack to the video in jack of monitor.
• Connect the adapter to the power input connector. Use a VDC and 300mA adapter.
IMPORTANT REMINDER
For outdoor applications, please seal carefully with included rubber ring and machine screws (4x).
These holes (totally 4 holes) should be sealed well by screw with rubber ring which is involved as accessories.
• Dome / Window Care
Handle the dome carefully to prevent scratching. If a scratch appears over the lens you can turn the dome to move
the scratch out of view.
• Power Supply
To avoid fire or shock hazard, must use a power supply, recommended by Videor.
• Monitor Impedance
Set the impedance switch to a 75 ohms standard position.
When monitor is set to high impedance mode, the picture become blurred. In this case, just check the switch
position of monitor impedance.
Video output
Video
(yellow)
GND
Power
(red)
No. Function
#1
Video Out
#2
Power Input

Terminal Colour
Yellow
Red