Adjusting The Shoulder Belts - CYBEX ATON 2 Manual De Uso

d
c
e
11

ADjUSTING THE SHOUlDER BElTS

NOTE! only if the shoulder belts
optimum security can be provided.
•
When the baby is approximately 3 months the seat
insert can be removed to provide enough space for
the child (see page 27).
•
The height of the shoulder belts
in such a way that they run through the belt slots
directly above the baby's shoulders.
To adjust the height of the shoulder belts
the next steps:
•
Press the red button to open the buckle e.
•
Pull the shoulder pads
remove them.
•
first pull one buckle tongue
s
out of the belt slot s. now insert it again through the
next higher slot. Repeat this step to adjust the other
side as well.
NOTE! Please make sure that the shoulder belts
not twisted but should lie flat against the main seat, run
t
evenly through the belt slots
c are adjusted correctly
c must be adjusted
c please follow
d over the belt tongues
t through the cover and
c
s and down to the buckle e.
s
t to
are