Preparation; Anti-Tip Bracket - Sub-Zero UC-24R Manual Del Usuario

SITE PREPARATION

Preparation

To operate properly, the door must open a minimum of 90°.
Use a minimum 3" filler in corner installations to assure
(76)
a 90° door opening.
Uncrate the unit and inspect for damage. Remove and
recycle packing materials. Do not discard the kickplate, anti-
tip bracket, hardware and the leveling legs which hold the
wood base to the bottom of the unit.
|
6 Sub-Zero Customer Care 800.222.7820

Anti-Tip Bracket

WARNING
To prevent the unit from tipping forward, the anti-tip
bracket must be installed.
The anti-tip bracket should be attached to the wall behind
the unit with the bracket flange located
of the unit. Refer to the illustration below. Failure to properly
position the anti-tip bracket will prevent proper engagement.
ANTI-TIP
BRACKET
1
/ "
4 (6)
Anti-tip bracket.
1 / " above the top
(6)
4