WEG CFW-11 Serie Guia De Instalacion página 20

External Power Supply for Control in 24 V - KVDC-CFW11-1
Step
4
Remove the two screws at the lower ends of the upper front cover.
5
6
Remove the plastic cover on the connector
and the ribbon-cable.
Be careful not to damage the components on
the board close to the connector.
20 | CFW-11/CFW70X
Actions/Instructions
Frame sizes D and E
Only frame size D
Loosen the ground flexible braid on the screening plate.
Frame size D Frame size E
Remove the ground cable from XC98 of the
vertical board of the control board, the plastic
cover on the connector and the ribbon-cable.
Be careful not to damage the components on
the board close to the connector.