WEG CFW-11 Serie Guia De Instalacion página 25

Step
15
Frame size D
Fit the ribbon-cable and the plastic cover on
the connector.
16
Frame size D
Fit the ground flexible braid on the lower
point on the screening plate of the control
17
Tighten the two screws at the lower ends of the upper front cover (in frame size E, the ground
flexible braid must be fastened together on one of the side parts as shown in the previous
External Power Supply for Control in 24 V - KVDC-CFW11-1
Actions/Instructions
board.
Frame sizes D and E
step).
Frame size E
Fit the ribbon-cable, the plastic cover on the
connector and ground cable to the XC98
connector of the vertical board of the control
board.
Frame size E
Fasten the ground flexible braid when
tightening the screw in the next step.
CFW-11/CFW70X | 25