WEG CFW-11 Serie Guia De Instalacion página 21

Step
7
8
Frame size D
Remove the ground screw from the power
board as indicated.
External Power Supply for Control in 24 V - KVDC-CFW11-1
Actions/Instructions
Frame sizes D and E
Remove the upper front cover.
board of interface with the power (DFOx), the
plastic cover on the connector and the 260-mm
Be careful not to damage the components on
Note: For 690 V models, only one ground
Frame size E
Remove the two ground screws from the
ribbon-cable.
the board close to the connector.
screw is removed, the upper.
CFW-11/CFW70X | 21