WEG CFW-11 Serie Guia De Instalacion página 6

External Power Supply for Control in 24 V - KVDC-CFW11-1
(g) Plastic cover for
ribbon-cable connector
Select the parts to be assembled on the inverter according to table 1; there are differences
according to the models.
Table 1: Items to be assembled according to the inverter model
Description
VDCx Electronic Board (a)
Metal spacer 28 mm (b)
Metal spacer 35 mm (b)
Plastic spacers 28 mm (c)
Plastic spacers 35 mm (c)
Insulation for the board (d)
Ribbon-cable 160 mm (e)
Clamp for ribbon-cable (f)
Plastic cover for ribbon-cable
connector (g)
M3 Screw (h)
2
Label (i)
Notes:
1 For information on the inverter frame size, check the technical specification table (table 8.1 on the user's manual of the CFW-11 and tables B.1 and
B.2 on the user's manual of the CFW700 / CFW701)
2 In case the replacement of the existing screw is needed.
3 For 690 V, only 1 unit.
4 For 690 V, use 2 units.
6 | CFW-11/CFW70X
(h) M3 Screw
Figure 1: (a) to (i) Content of the KVDC kit
Quantity by Inverter Model
CFW-11
Frame Size Frame Size
A B
1 1
1 1
- -
3 3
- -
- 1
1 1
1 1
2 2
1 1
2 2
.
(i) Label
(UN)
1
CFW-11/CFW70X
Frame Size Frame Size
C D
1 1
- 1
1 -
- 3
2 -
- 1
1 1
1 1
2 2
1 1
2 2
Frame Size
E
1
-
2
3
-
1
4
-
1
1
2
2
2