4. How to operate
• Turn on the power by pressing down the Power Button.
•Press the Program button until the program number suitable for the
file to be used is displayed. (Press down the program button until
you hear a 'beep' sound to save the current settings to memory).
Program from No.1 to 5 is Normal mode, Program from No.6 to 7
is Reciprocating mode.
• The Select button is to change the set value of auto-rotation mode,
torque, gear ratio or reciprocal angle to match the fi le being used.
(for reciprocal angle: press Select for forward rotation, then press
Select again for reverse rotation).To change values, use the Up/
Down button; then save the set value by pressing and holding the
Program button.
• Operate the product by pressing down On/Off Button.
• After operation, put the motor handpiece into the stand; turn off by
pressing down Power Button.
5. Program
• There are 5 normal programs available and it can set the initial
and setting value-RPM-Torque-Gear ratio. There are 2 reciprocating
programs where the user can freely adjust the angle for forward
rotation and reverse rotation.
• Find the needed program among set program.
• Control the button to adjust Auto rotation mode-RPM-Torque-Gear
Ratio or reciprocal angle.
• Sounds "Beep" after program memorized by pressing down Pro-
gram Button
6. Auto Reverse Function
• If the load reaches to torque limit value, it starts reverse with
"Beep" sound. At this time, two auto reverse modes are avilable.
BAE370R_IFU-Final.indd 11
Warning
• Due to Automatic Power Off function, after 4 min.
without On/Off Button operation, the unit turns off
automatically However if the device is operated , the
Power will not turn off automatically.
Warning
• If load on the fi le reaches the preset torque, alarm sound changes.
If load on the fi le is over the preset torque, three modes can be
selected as below.
• The three Auto-rotation modes are available to be set by pressing
down Select (S) button three times. Then press down the Up/Down
button to select the mode.
11
02/04/2019 12:22:32