Reset And Special Settings With Password; Instructions And Warnings For The End User - Key Automation CT-PAE Instrucciones Y Advertencias Para Su Instalación Y Uso

6.2 - Reset and special settings with password

Turning on or resetting the device holding down the OK button for
3 seconds, you will hear a short beep and the display will show:
"0000"
Operating + and - you can edit the first two digits and the second
two digits of the number separately, then setting a password which
must be confirmed by holding down the OK button for two seconds.
Depending on the password set, the following operations will be

7 - INSTRUCTIONS AND WARNINGS FOR THE END USER

Key Automation S.r.l. produces systems for the automation of gates,
garage doors, automatic doors, rolling doors, parking lots and road
barriers. However, Key Automation is not the manufacturer of your
automation, which is rather the result of a process of analysis, evalu-
ation, selection of materials, and installation performed by your own
installer. Each automation is unique and only your installer has the
experience and professionalism required to create an installation to
suit your needs, safe and reliable over time, and carried out accord-
ing to the good industry practice, i.e. compliant with the current regu-
lations. Even if your automation meets the security level required by
law, this does not exclude the existence of "residual risks", i.e. the
possibility that it may cause dangerous situations, usually as a result
of improper or irresponsible use; for this reason we would like to give
you some suggestions:
Before using the automation for the first time, ask the installer to
explain the origin of residual risks.
Keep this manual for future use and deliver it to any new owner of
the automation.
Inappropriate or improper use of the automation can make it danger-
ous: do not command the movement of the automation if people,
animals or things are in its range.
Children: If properly designed, an automation ensures a high degree
of security, preventing movement in the presence of people or things
with its detection systems, and ensuring always predictable and safe
activation. It is prudent to prevent children from playing near the au-
tomation and keep remote controls out of their reach to prevent ac-
cidental activation.
Malfunctions: As soon as you notice any malfunctions, disconnect
the installation from the power supply and operate the manual re-
lease. Do not attempt any repairs by yourself, but require the assis-
tance of your installer: meanwhile, the installation can operate like
a non-automated opening device after releasing the motor with the
release key supplied with the system.
In case of failures or power failures: while awaiting the arrival of
your installer or the restore of the electricity, if the installation is not
equipped with backup batteries, the automation can be operated as
any normal non-automated opening device. To do this, you must run
the manual release ( the only operation on the automation allowed
to the end user).
Release and manual movement: before performing this operation
pay attention that the device can be released only when the door is
stationary.
Maintenance: Like any machine, your automation needs periodic
maintenance to ensure its long life and total safety. Agree with your
performed:
password 2468: Start cyclic test mode.
password 8765: Reset all default parameters. After the reset,
learning is forced:
Please note: Until the first learning operation has been com-
pleted, all parameters will be reset to default at every start-up
or reset.
password 1234: Enabling special views
installer on a maintenance plan on a periodic basis; Key Automation
recommends a frequency of 6 months for normal domestic use, but
this period may vary depending on the intensity of use. All inspec-
tion, maintenance or repairs should be performed only by qualified
personnel;
Do not change the installation and control or programming param-
eters of the automation: the responsibility lies with your installer;
The testing, routine maintenance and any repairs must be docu-
mented by the person who performs them, and related documents
must be kept by the owner;
The only interventions that are possible for the user and should be
carried out periodically are the cleaning of the covers of the photo-
cells, as well as the removal of any leaves or rocks that could block
the automation. To prevent anyone from activating the door, before
proceeding, remember to release the automation and clean only
with a cloth slightly dampened with water;
Disposal: At the end of the automation life, make sure that the dis-
mantling is carried out by qualified personnel and the materials are
recycled or disposed of according to local regulations in force;
Operate the door (with remote control, key switch, etc..); if every-
thing is working properly, he door will open and close normally, oth-
erwise the flashing light flashes and the manoeuvre does not start;
With the safety devices out of use, the automation must be repaired
as soon as possible;
Replacing the remote control battery: if your remote control seems
to work worse or not work at all after a while, this may simply de-
pend on the exhaustion of the battery (depending on use, it may
take several months to over a year). In that case, you will see that
the confirmation of transmission light does not turn on, or comes on
only briefly;
The batteries contain polluting substances: do not throw them in the
garbage but use the methods prescribed by local regulations.
Thank you for choosing Key Automation; for more information feel
free to visit our website www.keyautomation.it.
EN
29