Final Assembly - Metra 99-3018 Instrucciones De Instalación

• Secure the radio/bracket assembly into the dash using the factory hardware.
Note: If the vehicle did not have factory navigation, insert the (2) copper
threaded inserts into the empty upper radio mounting holes in the dash cavity.
• Snap the radio trim panel over the radio, and then reassemble the dash in
reverse order of disassembly.
• The upper dash trim panel is intended for use in NAV equipped vehicles only. A
factory version of this panel is also available from the dealership.
Note: The metal clips for the upper dash trim panel must be oriented per Figure
A or they will not engage properly.
99-3018

Final Assembly

(Figure A)
15