Kit Assembly - Metra 99-3018 Instrucciones De Instalación

ISO DIN radio provision with pocket
1. Attach the pocket to the radio
brackets using the (4) #8 x 3/8"
Phillips screws supplied. (Figure A)
2. Remove the metal "DIN" sleeve and
trim ring from the aftermarket radio.
3. Slide the radio into the bracket/
pocket assembly, and then secure
it using the screws supplied with
the radio. (Figure B)
Continue to Axxess
Interface Installation

Kit Assembly

(Figure A)
(Figure B)
99-3018
ISO DDIN radio provision
1. Attach the radio brackets to the
radio using the screws supplied
with the radio. (Figure A)
Continue to Axxess
Interface Installation
6
(Figure A)