Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Existing construction accessible from above
C11
EXISTING FAN
Remove an existing fan and check to make sure the opening is
large enough to accommodate the new motor housing (8"x 8.5").
Cut out an opening for the housing.
C13
5/8
1/2
Position the correct depth mark at the bottom edge of the joist
based on the thickness of your sheetrock.
OR
Use the motor housing as a template to mark position.
C12
C14
5/8
1/2
Mark position of screws by using holes as a template.
11
43053-01 12/01/2013
NO EXISTING FAN
Slide the mounting rails into brackets.
Publicidad
Tabla de contenido
