Hunter 80707 El Manual Del Propietario página 9

B17
Tighten screws.
B19
F1
Go to step F1 on page 20 to connect the wires as shown.
B21
Connect 4" duct and vent to the outside. Tape joints. If ducting
does not fit securely, an adapter may need to be purchased.
B18
Install the wiring cover plate. Make sure all wiring
connections are inside the box or under the wiring cover plate.
B20
Install the wiring cover plate. Make sure all wiring connections
are inside the box or under the wiring cover
B22
Connect wiring from the motor to the wiring cover plate.
9
43053-01 12/01/2013
plate..