Operation
WolfPac
6100
TM
36
TIE DOWN
Roller is equipped with front and rear tie down rings for shipping purposes. Use only these
tie downs to secure unit, tie downs may be used in emergency or breakdown (see owing &
Bypass Section)
Tie downs are not intended for lifting purposes.
When loaded, the roller must be secured using
chains, ropes, straps, etc. of sufficient strength
to hold the roller safely in all circumstances.
he tie down points on each side, must be used
in conjunction with those on the trailer or
lorry.
Ensure the following:
1.
Drive Control Lever is in the Neutral Position
2.
Start Key has been Removed
3.
Battery Isolator Key has been Removed
Suggested method for securing roller to trailer bed/truck
Lashing Chain,
Rope, Strap, etc.
WARNING
Truck/Trailer Bed
Place chocks as shown and nail to Truck/Trailer bed.
Tie Down and Lifting Points
Securing oller for Transport