KRATOS SAFETY KS2001 Guia De Instalacion página 13

1.7) SIGN BOARD:
The signboard supplied should be fitted at the access point to the ladder in the most visible position.
The signboard is mandatory. The boxes must be filled in.
An identification number enables you to identify your installations and ensure follow-up.
1.8) USE:
The system is ready to be used; if the methodology described above has been followed, the installation does not require any additional
operations.
However, it is necessary to make an acceptance of the device thus installed; the person in charge of the installation must fill the
questionnaire below:
(any check mark in the NOT OK column leads to the inability to use the facility until it is brought into conformity)
The system has top and bottom spring loaded retractable terminations that prevents the trolley from accidentally slipping off the rail
The installation is complete, with top, bottom and intermediary mounting brackets, anchor line (energy absorber and
tensioner if necessary)
All the mounting brackets (top, bottom or intermediary) are installed on the structure according to the recommendations given
in this guide AND with the fastenings provided by the manufacturer
For the rail installations (only): the junctions are present for each section change AND properly fixed
The intermediary mounting brackets are present at the intervals defined
All the nuts are properly installed AND with an anti-release system (Nylock nut OR nut with Grower washer – or equivalent
OR nut locknut)
The rope grab/trolley slides freely on the anchorage line without blocking
The system has a sign board
The system is perfectly aligned vertically, from the top to the bottom
The system shows no inclination exceeding 10°
This installation guide and the PPE User Instruction Manual of the fall arrest system have been given to the operator
OBSERVATIONS :
Acceptance – Tests: No testing is required on a system thus installed. Kratos Safety certifies that the top points (EN795 class A) and the
fall prevention systems (EN353-1/2) comply with the European standards in force. Tests or action by third party organisations for
acceptance of the system cannot be charged to KRATOS SAFETY.
Operating company:
Adress:
Telephone:
Fax:
Handed over to:
Name:
Signature
INSTALLED BY
PRODUCT / SYSTEM
STANDARD / NORM
BATCH AND YEAR OF
MANUFACTURE
LENGTH (in M)
INSTALLATION DATE
ACCEPTANCE DATE
INSPECTION DATE
Description of the verifications
Date :
4 RUE DE L'AIGUE
69780 ST PIERRE DE CHANDIEU
FRANCE
TEL : +33 (0)4 72 48 78 27
Installing company:
Adress:
Telephone:
Fax:
Handed over to:
Name:
Signature
- 12 -
N.A. OK NOT
OK
Date :