Designated Use; Technical Data - Abicor Binzel ABITIG Little Serie Instructivo De Servicio

®
ABITIG Little

1 Designated Use

1.1 Technical Data

Welding
Transport and storage
Relative humidity
Tab. 1
Ambient temperature
Type of voltage
DC polarity of the electrodes
Type of use
Voltage rating
Max. arc inflammability and stabilization voltage
Breakdown voltage 50 Hz
Protection type of the machine-side connections
Shielding gas
Electrode
Tab. 2 General torch data (EN 60 974-7)
Switching voltage of trigger
Switching current of trigger
Switching power of trigger
Tab. 3 Electrical control devices
The TIG welding torch of the ABITIG
in the trade for inert gas welding using tungsten electrodes and inert gases. It
consists of the torch neck with equipment parts and wearing parts, handle and
cable assembly with central connector. The TIG manual torch corresponds to
EN 60 974-7 and is not a device having its own function. Arc welding can only
be carried out in connection with a welding power supply.
1 Designated Use
®
Little range are used in industry and
- 10 °C to + 40 °C
- 10 °C to + 55°C
up to 90 % at 20 °C
DC or AC
Usually negative
manual
113 V peak value
8 kV
IP3X (EN 60 529)
as per DIN EN ISO 14175
Tungsten electrodes suitable for TIG
use, preferably low-radiation
0.02 - 42 V (DC and AC)
0.01 - 100 mA
max. 1 W (resistive load)
EN - 3