Troubleshooting - YSI Ecosense EC300A Manual Del Usuario

TROUBLESHOOTING

MAIN DISPLAY
OvEr
OvEr/Undr during calibration
MAIN SECONDARY
DISPLAY DISPLAY
OvEr/Undr
 Conductivity is >200.0 mS
 Salinity is > 70.00 ppt
 Cell Constant Calibration
Temperature >90.0 C
OvEr
Temperature < -10.0 C
Undr
PROBLEM
is out of range
7
POSSIBLE SOLUTION

Completely submerge the
probe.

Allow sufficient time for the
electrode and Temp probe
stabilization.

Recalibrate with correct value
for the conductivity standard.

Replace conductivity
standard.

Clean cell.

Return for service.
 Decrease/Increase the
sample temperature.
 Return for service.