Programming And Configuration; Ventilation Speed Configuration - Duran Electronica 203 PLUS Serie Manual De Instalacion Y Uso

2. PROGRAMMING AND CONFIGURATION

2. PROGRAMMING AND CONFIGURATION
1 VENTILATION SPEED CONFIGURATION - SPANISH STANDARD
The Control Unit is programmed at the factory according to the following parameters:
Checking the level programmed
1. Press CHANGE VENTILATION LEVEL
display
Ventilation
Level
Changing the ventilation level
Remember that only the ventilation level can be selected, as the alarm level is automatically
set, according to the following table:
To change the ventilation level, follow the instructions below:
1. Press CHANGE VENTILATION LEVEL
followed by the level programmed at the factory or the last level programmed.
Ventilation Level
Alarm Level
Ventilation Mode
Acoustics
Initial level Ventilation
(blinking)
Ventilation
25 ppm
50 ppm
75 ppm
100 ppm
125 ppm
150 ppm
200 ppm
250 ppm
50 ppm
100 ppm
Automatic
Activated
and observe the sequence on the
Confirmation Alarm
Ventilation level
Alarm Level (automatic)
75 ppm
100 ppm
150 ppm
200 ppm
250 ppm
300 ppm
300 ppm
300 ppm
. The display will show
Alarm level
assigned
41
X-manplus-v04