Electric Handle Heating; Starting / Stopping The Engine - Stihl MS 441 C-M Manual De Instrucciones

English
Mounting the cover plate (special
accessory)
Insert cover plate (1) with both tabs
N
(arrows) and fasten with screws (2)
When the mounting kit is used, the slide
must be in the winter position.
If engine trouble occurs, first check
whether use of the cover plate is
necessary.
36

Electric Handle Heating

Switching on the handle heating system
(depending on equipment version)
Set switch to F – to switch off, return
N
switch to the 0 position
Overheating during continuous use is
impossible. The heating system is
maintenance-free.
Starting / Stopping the
Engine
Positions of Master Control Lever
STOP
0
Stop 0 – engine off – the ignition is
switched off
Run position F – a hot engine is started
in this position or the engine runs in this
position
Start position } – a cold engine is
started in this position.
Setting the Master Control Lever
To move the Master Control lever from
the run position F to start }, depress
the trigger lockout and the throttle trigger
and hold them in that position – set the
MS 441 C-M