Features And Controls - Briggs & Stratton Troy-Bilt Manual Del Operador

Features and Controls

Read this Operator's Manual and safety rules before operating your pressure washer.
Compare the illustrations with your pressure washer, to familiarize yourself with the locations of various controls and
adjustments. Save this manual for future reference.
A
B
C
D
A - Spray Gun — Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
B - Nozzle Extension with Quick Connect — Allows you to
switch between three different spray tips.
C - High Pressure Hose — Connect one end to water pump
and the other end to spray gun.
D - Oil Fill/ Dipstick — Check and fill with oil here.
E - Pump — Develops high pressure.
F - Automatic Cool Down System — Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
G - Air Filter — Protects engine by filtering dust and debris
out of intake air.
H - Detergent Siphoning Tube/ Filter — Use to siphon
pressure washer safe detergents into the low pressure
stream.
J - High Pressure Outlet — Connection for high pressure
hose.
8
K - Water Inlet — Connection for garden hose.
L - Engine Controls — See engine manual for details on
engine controls.
M - Recoil Starter — Used for starting the engine manually.
N - Fuel Tank — Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
P - Warning/Operating Instructions Tag — Identifies
hazards and proper procedure to start/stop pressure
washer.
R - Accessory Tray — Provides convenient storage for
standard and optional accessories, such as brushes,
turbo wands, etc.
S - Spray Tips — Detergent, 0°, and 25°: for various high
pressure cleaning applications.
Items Not Shown:
Data Tag (near rear of base plate) — Provides model and
serial number of pressure washer. Please have these readily
available if calling for assistance.
S
R
P
N
M
L
J K
,
H L
G
E F
,
www.troybilt.com