Setting The Ringer Volume; Last Number Redial - ClearSounds CS-A300 DECT 6.0 Manual Del Usuario

Setting the Ringer Volume

press the SoFT KEY under Menu in the LCD Screen.
press the UP or DOWN KEY to scroll through the menu and select
HS Settings by pressing the LEFT SoFT KEY
press the DoWN KEY again to scroll to RING SETUp then press the
SoFT KEY to make your selection.
press the DoWN KEY again to select INT RING or EXT RING press
the SoFT KEY to select
press the DoWN KEY again to select VoLUME press the SoFT KEY
Use the Up and Dow Keys to scroll through the volume selections
Volume 1 through Volume 5 and No Volume. press the SoFT KEY to
Save. You will hear a confirmation tone to confirm your selection has
been saved.
Setting the Ringer Melody
press the SoFT KEY under Menu in the LCD Screen.
press the DoWN KEY to scroll through the menu and select HS
SETTINGS by pressing the SoFT KEY
press the DoWN KEY again to scroll to RING SETUp then press the
SoFT KEY to make your selection.
press the DoWN KEY again to select INT RING or EXT RING press
the SoFT KEY to select
press the DoWN KEY again to select MELoDY press the SoFT KEY
Use the UP or DOWN Keys to scroll through the Melody selections
Melody 1 through Melody 10. press the SoFT KEY to Save. You will
hear two confirmation tones to confirm your selection has been
saved.
NOTE: If you turn the ringer OFF, when a call comes in, only the New
Call information appears on the LCD. If you activate the shaker and
visual ringer function when a call comes in the handset will shake and
the visual ringer will also flash with the ring melody you have set.

Last Number Redial

press the RIGHT KEY in Standby mode.
The LCD will display the lat number you dialed
press the DIAL KEY to dial the number
Note: The A300 allows you to retrieve the last 10 numbers you have
dialed and recall them quickly.
12 – ENGLISH