ClearSounds CS-A300 DECT 6.0 Manual Del Usuario página 31

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Settings, press the SoFT KEY to SELECT
Using the DoWN KEY select ToNE SETUp, press the SoFT KEY to
SELECT.
Use the DoWN KEY to select RANGE ALARM, press the SoFT KEY
to SELECT
Use the DoWN KEY to choose oN/oFF to enable or disable this
feature, press the SoFT KEY to select SAVE.
This feature allows you to page the handset from the base unit, and
is helpful in locating a misplaced handset.
press the pAGE Button on the base (less than 5 seconds), the handset
will ring for about 60 seconds
The Supplied handset is already registered with the base unit. Before
registering a handset to the base, you should press and hold the
page key on the base of the phone for about 5 seconds then release
it.
1 press the SoFT KEY under Menu in the LCD Screen.
2 press the Up or DoWN KEY to scroll through the menu and select
REGISTRATIoN by pressing the LEFT SoFT KEY
3 Use the SoFT KEY to SELECT
4 press the Up or DoWN KEY to scroll through the BASE NAMES LIST, press
the SoFT KEY to SELECT a name for the base. The handset will search for
the requested base and the relevant information will flash on the LCD.
If the base is found, and the handset is successfully registered, you
will be prompted to enter the pIN Code (the default code is 0000).
on validation of the pIN code, the Registration tone will sound and
the base assigns a number to the handset. If the pIN code entered
is invalid, a warning tone will sound, and the handset will return to
the previous registration state.
REGISTERING THE HANDSET
Paging
31 – ENGLISH

Publicidad

Tabla de contenido
loading

Tabla de contenido