ClearSounds CS-A300 DECT 6.0 Manual Del Usuario página 17

Press the DOWN KEY to scroll through the menu and select either
Off or On then press the SOFT KEY to make your selection
Using the The Answering Machine Alert
You can set-up your A300 to alert you with a Tone when you receive
a new message
Press the SOFT KEY under TAM while in standby mode.
Press the DOWN KEY to scroll through the menu and select TAM
SETTING then press the SOFT KEY to make your selection
Press the DOWN KEY to scroll to TAM Alert then press the SOFT
KEY to confirm.
Press the DOWN KEY to scroll through the menu and select either
Off or On then press the SOFT KEY to make your selection
Selecting An Answer Mode
Your A300 answering machine operates in two modes, answer and
record (Announce 1), and answer only (Announce 2).
Press the SOFT KEY under TAM while in standby mode.
Press the DOWN KEY to scroll through the menu and select TAM
SETTING then press the SOFT KEY to make your selection
Press the DOWN KEY to scroll to ANNC Select then press the SOFT
KEY to confirm.
Press the DOWN KEY to scroll through the menu and select either
Announce 1 or Announce 2 then press the SOFT KEY to make your
selection
NOTE: Announce 2 will be played when your answering machine is
full, even if you have selected Announce 1.
Setting the Ring Delay
You can select the number of rings before your answering machine
takes an incoming call. You can select from 2 to 6 rings or Toll Saver
mode.
Press the SOFT KEY under TAM while in standby mode.
Press the DOWN KEY to scroll through the menu and select TAM
SETTING then press the SOFT KEY to make your selection
Press the DOWN KEY to scroll to SET RING then press the SOFT
KEY to confirm.
Press the DOWN KEY to scroll through the menu and select  2 -6
rings or Toll Saver. then press the SOFT KEY to make your selection
17 – ENGLISH