Answering A Call; Making A Call - ClearSounds CS-A300 DECT 6.0 Manual Del Usuario

along the edge of one of the "arms" and release the clip. It should
then lift off easily.
Turning the Handset On/Off
If the handset is in off mode when you place the handset on the base,
it automatically turns on. To turn the handset on or off in standby
mode, follow these steps:
To turn the handset on when it's off, press and hold the END KEY
until you switch the display on. on power up, the handset will enter
subscription mode and search for a registered base. A message as
shown here will be displayed to the user, and the Antenna Icon will
flash.
To turn the handset off, key the END KEY key pressed until the display
turns off.
NOTES: If the handset is successful in finding a base, the handset
will enter the Standby mode, the display will show handset number
and the handset name, antenna icon, battery icon, and current time.
If the handset is not successful in finding a base, the handset will
behave according to the Out of Range condition.
Nothing will appear on the LCD when battery power is very low. YOU SHOULD
FULLY CHARGE THE HANDSET BEFORE USING.
BASIC A300 OPERATION

Answering a Call

If the handset is off of the base, press the DIAL KEY to receive the call. The
oFF HooK ICoN will appear on the LCD.
or if you activated the Auto Answer Function - If the handset is in the base,
lift the handset to receive the call.
When you are finished with your call either press the END KEY or
replace the handset on the base.
NOTE: When you finish the call the LCD displays the call duration
time.

Making a Call

pick up the handset and press the DIAL KEY and wait for a dial
tone.
8 – ENGLISH