Maintenance; General Information; Status Of The Internal Rechargeable Batteries; Cleaning The Instrument - HT Italia MPP300 Manual De Usuario

7. MAINTENANCE

7.1.

GENERAL INFORMATION

The instrument you purchased is a precision instrument. While using and storing the
instrument, carefully observe the recommendations listed in this manual in order to prevent
possible damage or danger during use. Do not use the instrument in environments with
high humidity levels or high temperatures. Do not expose to direct sunlight. Always switch
off the instrument after use.
7.2.

STATUS OF THE INTERNAL RECHARGEABLE BATTERIES

The status of the POWER LED provides indications about the operating/charge status of
the instrument's internal rechargeable batteries
POWER: GREEN steady:
GREEN flashing:
RED flashing:
 In case the LED indicates the condition of almost flat batteries, we
recommend connecting the instrument to power supply. It is not necessary
to stop possible measurements in progress to connect the power supply
 If the instrument detects a too low battery voltage, it stops possible
recordings in progress and switches off
 The instrument maintains the data stored also in case of flat battery
7.3.

CLEANING THE INSTRUMENT

Use a soft and dry cloth to clean the instrument. Never use wet cloths, solvents, water, etc
7.4.

END OF LIFE

CAUTION: this symbol indicates that the appliance, its accessories and the
internal batteries must be collected separately and correctly disposed of
MPP300 supplied by external power supply
MPP330 supplied by internal batteries
Batteries of MPP300 almost flat
CAUTION
EN - 21
MPP300