Tabla de contenido
Publicidad
(*) Only available in the model Robot 600 Plus
Inox
If the model of your appliance does not have the
accessories described above, they can also be
bought separately from the Technical Assistance
Service.
INSTRUCTIONS FOR USE
BEFORE USE:
- Make sure that all the product's packaging has
been removed.
- Before using the product for the first time, clean
the parts that will come into contact with food in
the manner described in the cleaning section.
- Prepare the appliance according to the function
you wish to use.
USE:
- Unroll the cable completely before plugging it in.
- Connect the appliance to the mains.
- Turn the appliance on using the on/off switch.
- Select the desired speed.
- Work with the food you want to process.
ELECTRONIC SPEED CONTROL:
- The speed of the appliance can be regulated
simply by using the speed regulator control
(A). This function is very useful, as it makes it
possible to adapt the speed of the appliance to
the type of work that needs to be done.
TURBO FUNCTION:
- The appliance has a Turbo function. By acti-
vating the Turbo function all the power of the
motor becomes available, thus obtaining a finer
finish in the final texture of the product.
ONCE YOU HAVE FINISHED USING THE
APPLIANCE:
- Stop the appliance by releasing the pressure on
the on/off button.
- Unplug the appliance to the mains.
- Clean the appliance
ACCESSORIES:
STICK BLENDER ACCESSORY (FIG.2):
- This accessory is used to make sauces, soups,
mayonnaise, milkshakes, baby food...
- Attach the stick blender to the motor body by
turning it in the direction indicated by the arrow
(Fig. 2.1).
- Pour the foodstuffs into the sieve and operate it
by pressing the start button (Fig. 2.2).
- Detach the stick blender by turning it in the
opposite direction to the arrow and remove it for
later cleaning (Fig. 2.3).
CHOPPING ACCESSORY (FIG. 3):
- This accessory is used to chop vegetables, nuts,
meat...
- Fit the adapter fitting to the motor unit by turning
it in the direction of the arrow. (Fig. 3.1)
- Fit the unit to the lid until hear the click. (Fig.
3.2)
- Put the food to be prepared in the chopping
container and attach the lid firmly. (Fig. 3.3)
- Start the appliance. Warning: do not start the
appliance if the entire unit is not properly seated
and fitted. (Fig. 3.4)
- Stop the appliance when the food reaches the
desired texture.
- Detach the unit from the lid and release the
adapter fitting. (Fig. 3.5)
WHISK ACCESSORY (FIG.4):
- This accessory is used to whip cream, beat egg
whites...
- Insert the whisk into the adapter fitting (Fig.4.1).
Fit the adapter fitting to the motor unit by turning
it in the direction of the arrow (Fig. 4.1).
- Place the food in a wide container and turn on
the device. For optimum results, move the whisk
clockwise.
- Remove the whisk accessory and release the
adapter fitting (Fig. 4.2).
- Note 1: Do not work at high speeds with this
accessory attached, as this would cause defects
in the whisk (spinning its wires).
- Note 2: To free the whisk (H) from the adapter
fitting (I), pull the ring on the whisk.
CLEANING
- Disconnect the appliance from the mains and let
it cool before undertaking any cleaning task.
- Clean the equipment using a damp cloth with a
few drops of washing-up liquid and then dry.
- Do not use solvents, or products with an acid or
base pH such as bleach, or abrasive products,
for cleaning the appliance.
- Do not submerge the appliance in water or any
other liquid, or place it under a running tap.
- During the cleaning process, take special care
with the blades, as they are very sharp.
- It is advisable to clean the appliance regularly
and remove any food remains.
- If the appliance is not in good condition of clean-
Publicidad
Tabla de contenido
