Symbols - Craftsman 125.DD20A Manual Del Usuario

Some of the following symbols may be used on this product. Please study them and
learn their meaning. Proper interpretation of these symbols will allow you to operate
the product better and safer.
SYMBOL
V
A
Hz
W
min
Alternating Current
Direct Current
No-load Speed
C lass II Construction
.../min
Wet Conditions Alert
R ead The Operator' s Manual
Eye protection
No-Hands Symbol
Recycle Symbol

SYMBOLS

NAME
Volts
Amperes
Hertz
Watt
Minutes
Per Minute
Safety Alert
Hot Surface
6 ― English
DESIGNATION/EXPLANATION
Voltage
C urrent
Frequency (cycles per second)
Power
Time
Type of current
Type or a characteristic of current
R otational speed, at no load
Double-insulated construction
R evolutions, strokes, surface speed,
orbits, etc., per minute
Do not expose to rain or use in damp
locations.
To reduce the risk of injury, user must
read and understand operator' s manual
before using this product.
Always wear eye protection with side
shields marked to comply with ANSI Z87.1.
Precautions that involve your safety.
Failure to keep your hands away from the
blade will result in serious personal injury.
To reduce the risk of injury or damage,
avoid contact with any hot surface.
This product uses lithium-ion batteries. Local, state,
or federal laws may prohibit disposal of batteries in
ordinary trash. Consult your local waste authority
for information regarding available recycling and/or
disposal options.