Logan L-D1681M-ND Manual Del Usuario página 22

channels.
Set: Recording parameter (main stream) and network parameters (extra stream) illustrate
Video/Audio: Set whether to record video and audio simultaneously.
Resolution: Set recording resolution. The Higher resolution, the better recording quality, occupies more
HDD capacity. Conversely, the lower resolution, the worse recording quality, occupies less
HDD capacity.
Frame Rate (FPS): set recording FPS; the higher recording FPS, the better fluency of recording images and
occupies more HDD capacity. Conversely, the lower recording FPS, the worse fluency
of recording images and occupies less HDD capacity.
Bit Rate Type: Set whether recording stream changes automatically according to image changes
Adjust recording quality, six grades are optional
Quality: Adjust the video quality, six grades are optional
Bit Rate (Kb/S): set recording stream statics under fixed stream state; The Higher Stream statics, the better
recording quality and occupies more HDD capacity. Conversely, the lower Stream statics,
the worse recording stream statics quality and occupies less HDD capacity.
Recording plan: Set DVR's recording plan and trigger mode
Channel: Choose the corresponding channel number to set the channel. Choose the all option to set the entire
channels.
Redundancy: Choose the redundancy function option to implement the file double backup function. Double
backup is writing the video files in two hard disks. When you do the double backup, make sure
that there are two hard disks installed. One is read-write disk and the other is redundant disk.
Length: Set the time length of each video file. 60minutes is default value (A maximum of 120 minutes).
Pre Record: Record 1-30 seconds before the action. (Time length is decided by the code stream)
Mode: Set video state: Schedule, Manual and stop.
Schedule：Record according to the set video type (common, detection and alarm)and time section.
Manual: after choosing manual button, the related channel will carry common recording whatever
state the current channel is.
Stop：Click the stop button and the according channel stops recording no matter the channel in any
state.
Week: set (Monday to Sunday) or full week to record, it will just record in set days
Period: Set the time section of common recording, the recording will start only in the set range.
Recording type: Set recording type: regular, detection or alarm.
Regular：Perform the regular recording in the set time section. The video file type is "R".
Detect：Trigger the "motion detect", "camera mask" or "video loss" signal. When above
Multi - functional
Picture 4.4 Recording Plan
22
Digital Video Recorder User Manual