【Digital channels】(Some models without this function)
Used to bind signals of the channels which video input type is digital network HD signal (signal can be
IPC, DVR, NVR etc.).
Channel: choose the channel number which needs to be bind
Enable: select , enable this function
Connection mode:
Single connection: only can bind one network device to display that channel
Multi- connections: can bind many network devices to tour display the channel.
After choosing connection, you also can set interval between tours of different network device.
Network configuration list: shows that have added all network, type, IP address, remote channel
information to that channel.
Note: Network device be chosen in
with this channel; conversely, it means unbinding (it needs to bind many network device under
multi-connection type.)
Add: add new network device for this channel (show as picture 4.32)
Delete: delete network device which is unnecessary to be bind
Multi - functional
Picture 4.30 Switch
Picture 4.31 Digital Channel
network configuration list, ,which stand for device was bind
39
Digital Video Recorder User Manual