Logan L-D1681M-ND Manual Del Usuario página 31

Enable: means that the motion detect function is on.
Sensitivity: Choose in the six options according to the sensitivity.
Region: Click setup and enter the set area. White block means the current cursor area location. Yellow
block means the dynamic detect defensive area. Black block means the unfenced area. You can set the area as
Picture 4.20 followed, Drag the mouse and draw the area.
Period: Trigger the motion detect signal in the set time section. You can set according to week or set
uniformly. Each day is divided into four time sections.
Interval: Only one alarm signal is turned on even there are several motion detect signals in the set interval.
Alarm output: Start the external equipment of corresponding linkage alarm when the motion detect alarm is
turned on.
Delay: Delay a few moments and stop when the alarm state is turned off. The range is 10~300 seconds.
Record channel: Choose the recording channel (multiple option supportive). Trigger the video signal when
the alarm is turned on.
Note：Set in the "main menu" "record" "record plan" and perform the linkage recording. And set
"desktop shortcut menu" "record mode" to be configured, motion detect linkage recording can work
Tour: choose the recording channel (multiple option supportive), which will tour preview with single screen
when have alarm signal
【PTZ Activation】Set the PTZ linkage when the alarm is turned on. As Picture 4.22
Note: using PTZ linkage, need to set preset, cruise between points and scan etc. parameters in "desktop
shortcut menu" "PTZ control""setting".
Multi - functional
Picture 4.20 set the area
31
Digital Video Recorder User Manual
means the set is valid.