Logan L-D1681M-ND Manual Del Usuario página 40

【remote access configuration】(NOTE: The product must support ONVIF and NETP)
To configure remote network device name, device type, channel, address, port, user name and password.
Device type: set network device type.
Remote access channel: when device type is DVR or NVR, you need to set specific DVR or NVR
channel number which signal get. When device type is IPC, default "1".
Stream: set main stream or sub stream to connect the network device.
Device address: set IP address of the network device.
Port: set port number of the network device.
User name: set user name to log in the network device.
Password: set password of network device.
Note: when binding signal to all digital channels, need to make sure resolution of the bind network
device is lower than the maximum resolution of the digital channel, or the images can't be
displayed.。
【Channel status】
Show the maximum resolution of all digital channels, connected signal resolution and connection status. See
picture 4.33
Picture 4.32 remote access configuration
Picture 4.33( 4 DVR) channel status
40
Multi - functional Digital Video Recorder User Manual