Alarm Output; Abnormality - Logan L-D1681M-ND Manual Del Usuario

4.4.5

Alarm output

Control alarm output state of all channels
Configuration: Alarm is on according to the configuration.
All: Click the all button and the according channel is alarming no matter the channel in any state.
Manual: whatever state it is, the relative channel output alarm signal after choosing manual button
Stop: Click the stop button and the according channel stops alarming no matter the channel in any state.
Status: means this channel has alarm output, otherwise without.
4.4.6

Abnormality

It will buzz and appear screen prompts once no disk, Storage Device error, disk no space, Net Disconnection, IP
conflict etc. happens, which is convenient for customers to know DVR abnormality.
Event Type：Choose abnormality type, support five matters
Enable: Select , enable these three settings
Less than: this item can be set only when matter type choose no disk space, set percent (1-99). When HDD
Multi - functional
Picture 4.26 alarm output
Picture 4.27 Abnormality
36
Digital Video Recorder User Manual