Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
NOTE: Use caution when assembling and operating this unit to avoid cuts and scrapes from edges.
Step 1: Install the casters, including 2 direction casters (2), 1 non-locking
swivel caster (3), and 1 locking swivel caster (4), onto bottom
shelf (1) using M6x12 screws (A), M6 spring washers (C,) and
M6 plain washers (B) as illustrated.
Hardware Used
A
M6x12 Screw
B
M6 Plain Washer
C
M6 Spring Washer
Step 2: Insert 4 screws (A) into holes in bottom shelf (1), leaving
4-6mm clearance from screw head to bottom shelf (1). Attached
cart left side panel (13) by placing the panel keyholes over the
screw heads (A) on the left side of bottom shelf (1), slide the
cart left side panel (13) so that the screw head is over the
smaller part of keyhole. Thread the screw (A) down snug but do
not tighten completely at this step. Repeat with cart right side
panel (5).
Hardware Used
A
M6x12 Screw
Dual Fuel Grill
ASSEMBLY INSTRUCTIONS
Qty: 16 pcs
Qty: 16 pcs
Qty: 16 pcs
Qty: 4 pcs
8
1
A
C
B
2
A
5
Publicidad
Capítulos
Tabla de contenido
