Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Step 17: First, Secure 2 shoulder screws (E) into holes of side table
supports (25) as shown. Secure side table (19) onto side table
support (25) by tightening 2 shoulder screws (E) into holes as
shown. Repeat step with the other side table.
Hardware Used
E
M6 Shoulder Screw
WARNING: IT IS VERY IMPORTANT TO CHECK
AND ENSURE THAT EACH AND EVERY BURNER
IS FULLY ENGAGED WITH THE ADJACENT VALVE
ORIFICE BEFORE COMPLETING STEP 18.
FAILURE TO DO SO MAY
RESULT IN FIRE OR
EXPLOSION, POSSIBLY
CAUSING SERIOUS
INJURY OR DEATH. REFER TO MAINTENANCE
SECTION INSTRUCTIONS TO PROPERLY CHECK
THE ENGAGEMENT.
Step 18: Place the heat tent (28) into gas grill body (24).
Step 19: Place the cooking grate (27) into the grill body (24), then
attach the warming rack (26) onto the grill body (24).
Note: The warming rack (26) inserts into the four holes that on
both sides of grill body (24).
Dual Fuel Grill
ASSEMBLY INSTRUCTIONS
Qty: 8 pcs
18
17
25
18
28
19
26
27
25
E
E
19
Publicidad
Capítulos
Tabla de contenido
