Dyna-Glo DGB730SNB Manual De Usuario E Instrucciones De Funcionamiento página 19

Step 15: Attach the Charcoal tray adjustment handle (23) to grill body
(24) by rotating the handle clockwise. Insert the cotter pin (G)
while the Charcoal tray adjustment handle (23) rotates in position.
Hardware Used
G Cotter Pin
Step 16: Install four side table supports (25) with two M6x12 screws (A)
separately into holes (labeled as AA) in side of grill body (24)
and tighten the screws.
Hardware Used
A M6x12 Screw
Dual Fuel Grill
ASSEMBLY INSTRUCTIONS
Qty: 1 pcs
Qty: 8 pcs
17
15
G
16
23
25
AA