Declaration Of Conformity - MIRKA CEROS Manual De Instrucciones

150 mm (6 in.), 125 mm (5 in.) & 77 mm (3 in.) 10,000 RPM Electrical Random Orbital Sander
(See "Product Configuration/Specifications" Table for particular Model) to which this declaration relates
is in conformity with the following standard(s) or other normative document(s) EN ISO
EN 60 745, EN 55 014, EN 61 000 in accordance with the regulations 2006/42/EC , 2004/108/EC.
Jeppo 22.8.2013
Place and Date of issue
Operator Instructions
Includes – Warranty, Please Read and Comply, Proper
Use of Tool, Work Stations, Putting the Tool Into
Service, Operating Instructions, Product Configuration/
Specifications Tables, Parts Page, Parts List, Sander Spare
Parts Kits, Trouble Shooting Guide, Service Instructions
Manufacturer/Supplier
KWH Mirka Ltd
66850 Jeppo, Finland
Tel. +358 20 760 2111
Fax +358 20 760 2290
U.S. WARRANTY
See Mirka 2+1 Warranty Booklet for details.
The warranty does not include:
• Normal wear and tear.
• Overloading or improper use i.e.
– Dropping the tool in water
– Damage caused by misuse
– Damage caused by anything other than defects in material and workmanship
– Dropping or other excessive impact
Normal maintenance and service that can be carried out by the operator:
• Changing of the backing pad
• Changing of the exhaust fitting
• Changing of the shroud
Note: All other service operations must be carried out by an authorized Mirka service center.
CM
CONFORMS TO UL STD
C US
60745-1, 60745-2-4
Intertek
CERTIFIED TO CAN/CSA STD
C22.2 No. 60745-1, C22.2 No. 60745-2-4
4006707

Declaration of conformity

KWH Mirka Ltd
66850 Jeppo, Finland
declare on our sole responsibility that the product
Company
Required Personal Safety Equipment
Safety Glasses Breathing Masks
Safety Gloves Ear Protection
2
Ralf Karlström, President and CEO
Important
Read these instructions
carefully before installing,
operating, servicing or
repairing this tool. Keep
these instructions in a safe
accessible location.
Input Voltage
110 VAC