Precautions And Warnings "After" The Use Of Equipment; Precautions And Warnings During The "Cleaning And Disinfection" Of Equipment; Precautions In Case Of Alteration In The Functioning Of Equipment; Precautions To Be Adopted Against Foreseeable Or Uncommon Risks, Related To The Deactivation And Abandoning Of Equipment - GNATUS Optilight Max Manual Delpropietario

Ocultar thumbs Ver también para Optilight Max:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

precautions, restrictions and WarninGs
Gnatus shall not be responsible for:
- Use of the equipment differing from that for which it is intended.
- Damages caused to the equipment, the professional and/or the patient by the incorrect
installation and erroneous procedures of maintenance, differing from those described in these
Instructions for use which come with the equipment or by the incorrect operation of it.

precautions and warnings "after" the use of equipment

- Turn off the main switch of the dental set when it is not in use for an extended period
of time.
- Always maintain the equipment clean for the next operation.
- Do not modify any part of the equipment. Do not disconnect the cable or other
connections without need.
- After using the equipment, clean and disinfect all the parts which may be in contact
with the patient.
- Upon noticing irremovable stains, splits or cracks in the light conductor or in the eye
protector, replace the damaged components.
precautions and warnings during the "cleaning and disinfection"
of the equipment
- Upon disinfecting the handpiece remove the light conductor, use neutral soap or alcohol
70% vol. Never use iodopovidone, glutaraldehydes, or chlorinated products, as over time,
they attack the surface of the body of the instrument. Never submerge the instrument in
disinfecting baths.
- The conductor should be cleaned and sterilized at 134ºC, before being used on the
next patient.
- Before cleaning the equipment, disconnect it from the electrical network.
- Avoid spilling water, even by accident, or other liquids inside the equipment, as it could
cause short-circuits.
- Do not use microabrasive material or steel wool in the cleaning, and do not employ
organic solvents or detergents which contain solvents such as ether, stain remover, gasoline,
etc.

precautions in case of alteration in the functioning of equipment

- If the equipment has any abnormality, check if the problem is related to any item
listed in the topic of unforeseen events (failures, causes and solutions). If it is not possible
to resolve the problem, turn off the equipment, remove the power supply cable from the
socket and contact your representative (Gnatus).
precautions to be adopted against foreseeable or uncommon
risks, related to the deactivation and abandoning of
equipment
In order to avoid environmental contamination or undue use of the Equipment after it
has become useless, it should be discarded in the suitable place (as per the local legislation
of the country).
- Pay attention to the local legislation of the country for the conditions of installation
and disposal of residue.
43

Publicidad

Tabla de contenido
loading

Tabla de contenido