Return And Disposal; Return; Disposal; Technical Data - Lovibond Tintometer SD 310 Oxi Manual De Instrucciones

18. Return and disposal

18.1 Return

All devices which are sent back to the manufacturer must be free from sample
!
remains and/or other harmful substances. Sample remains on the housing or on
the sensor can endanger persons or the environment.
i
Use suitable transport packaging for the return of the device, especially if it is still a
functioning device. Make sure that the device is protected with sufficient insulating
material in the packaging.

18.2 Disposal

Drop off the depleted batteries at a collection center designated for this purpose.
The device may not be disposed of with the household waste. If the device should be disposed
of, send it directly to us (with sufficient postage paid). We will dispose of the device properly
and in an environmentally friendly manner.

19. Technical data

Measurement O
ranges
O
O
Sensor
temperature
Ambient pressure 10 - 1200 hPa
Precision Oxygen
Nominal
temperature,
1000 hPa abs.
Sensor
temperature
Precision Ambient pressure 3 hPa or 0.1% of meas. (higher applicable)
Working
conditions
Nominal
temperature
Storage
temperature
Connections O
Ambient pressure Universal pressure joints for hoses with 4 and 6 mm
Interface / ext.
Supply
56
0.00 - 70.00 mg/l
concentration
2
or ppm
saturation 0.0 - 600,0 % O
2
partial pressure 0 - 1200 hPa
2
O2 (0,0 - 427.5
mmHg)"
-5.0 - 50.0 °C
abs.
±1.5 % from measurement value ±0.2 mg/l (0-25
mg/l)
or ±2.5 % from measurement value ±0.3 mg/l
(25-70 mg/l)
± 0.1 °C
Sensor 0 - 40 °C / device -25 - 50°C; 0 - 95 % r.h.
(non condensing)
25°C
Sensor 0 - 40 °C / device -25 - 70 °C
& temperature 7-pin bayonet connection
2
inside Ø
4-pin bayonet connection for interface and supply
(USB adapter USB 5100), analog output 0-1V,
adjustable
2
NTC 10k (integr. in sensor)
Integr. pressure sensor
SD_310_2 07/2018