Ec Declaration Of Incorporation For Partly Completed Machinery; Technical Data - Erreka HYPERFOR Manual De Instrucciones

1.2 - EC DECLARATION OF INCORPORATION
FOR PARTLY COMPLETED MACHINERY
(DIRECTIVE 2006/42/EC, ANNEX II-B)
The manufacturer Matz-Erreka S.Coop., headquarters in
Bº Ibarreta s/n, 20577 Antzuola (Gipuzkoa), España
Under its sole responsibility hereby declares that:
the partly completed machinery model(s):
HYPERFOR
Description: electromechanical actuator for sliding gates
• is intended to be installed on sliding gates, to create a machine
according to the provisions of the Directive 2006/42/EC.
The machinery must not be put into service until the final
machinery into which it has to be incorporated has been
declared in conformity with the provisions of the Directive
2006/42/EC (annex II-A).
• is compliant with the applicable essential safety requirements
of the following Directives:
Machinery Directive 2006/42/EC (annex I, chapter 1)
Low Voltage Directive 2006/95/EC
Electromagnetic Compatibility Directive 2004/108/EC
Radio Directive 99/05/EC
Directive ROHS2 2011/65/CE
The relevant technical documentation is available at the national
authorities' request after justifiable request to:
Matz-Erreka,S.Coop.
Bº Ibarreta s/n, 20577 Antzuola (Gipuzkoa), España
The person empowered to draw up the declaration and to
provide the technical documentation:
Roberto Corera
Business Manager
Antzuola, 17/10/2011

2 - TECHNICAL DATA

Gate maximum weight
Power supply
Maximum power
Full load current
Gate maximum speed
Maximum thrust
Duty cicle
Pinion
Operation temperature
Weight
Protection
Maximum load on 24 VAC attachments
Protection fuses
- 64 -
4000 Kg
400VAC / 50Hz
1100 W
2 A
0.16 m/s
4800 N
50%
M6 - Z15
-20°C ÷ +55°C
35 Kg
IP55
10W
F1 = F2A - 500V
F2 = F250mA
F3 = F1A