Salva KWIK-CO 2010 Instrucciones Previas Al Montaje página 49

1. 1. Storage and transport Storage and transport
2. 2. Conditions for use Conditions for use
Previas_Kwikco_10_(c-f-i)040511
The oven is always sent packed on a wood platform, and co-
vered with plastic film, that protects the machine against hu-
midity and rain.
The oven should be transported in a completely closed vehi-
cle, and it should never be left outdoor.
The oven has been manufactured to be installed indoor. It is
not made to work outdoor. Any possible contact with water
has to be avoided.
The oven should not be installed in places with excessive heat,
steam and/or humidity production.
The oven is prepared to work under the following external con-
ditions: -10 + 40 ºC, and 0 + 90 % of humidity.
The room in which the oven has to be installed must have ade-
quate ventilation. If there is a fumes extractor, then a window
with at least the section of the fumes extractor should be kept
open.
The position of the oven regarding the side and back wall of
the installation premises should have a minimum distance of
2" (50 mm) between the oven sides and the walls of the room.
-3-
salva