BADU JET Perla Traduccion De Las Instrucciones página 75

Problem: Pump seizes.
Possible cause
Mechanical seal is stuck.
Problem: Pump leaks.
Possible cause
Mechanical seal is worn or
damaged.
Problem: Loud motor noise.
Possible cause
Faulty ball bearings.
Direction of rotation is wrong
(3~).
Problem: No water jet despite the unit being turned on.
Possible cause
Air in the system.
Leakage in the suction line.
Air drain valve leaking or not
closed
09|2018
Solution
 Turn the motor shaft. See
point 6.1.2 on page 26.
 Clean pump and pump
parts.
Solution
 Have a professional
replace the mechanical
seal.
Solution
 Have a mechanic replace
the ball bearings.
 Have a qualified
electrician check it.
Solution
 Tighten screw
connections.
 Replace the seals.
 Ventilate pump.
 Tighten screw
connections.
Check for leaks.

 Close the tap.
 Check for leaks.
Faults
EN 33