OPERATION
CONTINUED
GAS DETECTION CARTRIDGES
FIGURE 7.1
The gas detection sensors are supplied in
individual cartridges. Select the cartridge for
each gas you wish to detect at the correct
alarm threshold for your region.
Visit rpbsafety.com for a list of available
sensors.
FIGURE 7.3
CO
Open
Open
Open
0
0
0
PPM
- - -
- - -
- - -
The cartridge will appear on the screen in the
box that correlates to the slot it was placed in.
The corresponding light above the screen will
glow red or green to indicate the status.
0
FIGURE 7.2
Make sure the contacts are clean before
inserting a new cartridge. See p. 21 for
instructions.
Insert the cartridge into any of the 4 slots in
the monitor. First locate the top end so the
tabs line up, then push the bottom until it
clicks.
FIGURE 7.4
CO
0
PPM
Each cartridge is represented by a box on the
home screen. Each box shows the gas type,
units of measure and the current reading.
Gas
Value
Unit of
Measure
13