Introduction; Key Features - RPB GX4 08-400 Manual Del Usuario

INTRODUCTION

The RPB GX4, model 08-400, tests the quality of compressed breathing air for Carbon
®
Monoxide and other gases*. Compressed Air is supplied to the unit through the sampling hose at
a constant flow to the sensors for continuous analysis.

KEY FEATURES:


Multiple gasses monitored simultaneously

Traceability of gas levels, temperature, alarms, air flow, sensor checks and more
 Internal web server for remote monitoring, reviewing logs and printing reports
 3 inch LCD display and 6 buttons to easily navigate the menus
 Exterior lights and alarms

Auxiliary output for external alarms, strobe lights or solenoids

Tamper switch sealed inside of unit
 Robust protective housing
 Mounts to a Radex filtration system
 Optional wall mount bracket

Optional protective travel case
The monitor must be supplied with Grade D air and must be free of oil and water to prevent
contamination of the sensors. A micro-mist filter prior to the Radex air filtration system is
recommended to protect the GX4 and the operator(s). Check with your local regulatory bodies for
more information on local requirements.
The monitor operates at 12 volts DC and can be used with either the 110/240v AC Adaptor
(P/N: 08-430) or the 12v cable with Battery Clips (P/N: 08-431). The unit is designed to
operate in temperature ranges of 14° to 120F (-10 to +50C) and Humidity levels of 5% - 99% (no
condensation).
The RPB GX4 when used with the Carbon Monoxide Sensor Cartridge (P/N: 08-420-01)
®
satisfies the requirements of OSHA rule 29 CFR 1910.134 for carbon monoxide monitoring.
RPB Safety provides maintenance service through its service centers. In some locations RPB
®
has units available for hire while your unit is being serviced. Contact our Customer Service
Department on 1-866-494-4599 or email: customerservice@rpbsafety.com
* Visit rpbsafety.com for a list of available gas sensors.
WARRANTY
This RPB Safety product is covered by a manufacture's warranty of 1 year. The manufacturer
®
warranty covers defects in material, workmanship and does not cover damage caused by misuse or
abuse. RPB Safety's only obligation and your exclusive remedy shall be to repair, replace or refund
®
the purchase price of such parts or products upon the presentation of proof of purchase. Maximum
liability is in no case to exceed the value of the RPB
Cartridges by oil or other contaminants will void the warranty on the Sensor Cartridge.
Safety Product involved. Damage to the Sensor
®
®
3