Wifi Connection - RPB GX4 08-400 Manual Del Usuario

GX4 GAS MONITOR
SETUP
CONTINUED

WIFI CONNECTION

To unleash the full power of the GX4, it is recommended to connect it to the internet via the built-
in wireless network transceiver. This connection allows easy firmware upgrades and the unit
hosts a website available to devices on that network. Use the website to stream real-time gas
levels, search through logs or print reports.
The GX4 can operate in two wireless modes. To select a mode in the Menu go to Network and
then Mode. Use the arrow keys to switch between modes and press OK to select a mode. The unit
will restart and resume operation in this network mode.
HOTSPOT MODE:
Use to connect directly to your GX4 when you
do not have access to an existing network.
 The GX4 Hotspot Mode does not connect
to the internet.
 Devices can only connect to one GX4 in
Hotspot Mode at a time.

For multiple GX4s, disconnect from one
before connecting to another.
Note: Although multiple devices can connect,
the GX4 is not a router. When in Hotspot
Mode your device can only communicate to
the host GX4.
Hotspot Mode
Hotspot Mode
or
PC
PC
To configure your network see page 15.
6
Internet
GX4
*Limited
Connectivity
or or
Smartphone
Tablet
CLIENT MODE:
Use when you have access to a wireless
network {IEEE 802.11 b/g/n}.
 The GX4 must be connected to the same
network as your PC/Tablet/Smartphone
 Access the GX4 website through your
internet browser.

Multiple GX4s can be connected in Client
Mode to the same network and each
individual GX4 website can be viewed on a
seperate web browser page.
Client Mode
PC
or
Tablet
PC
Internet
Wireless
Router
or
GX4
Smartphone
Client Mode