Menus - RPB GX4 08-400 Manual Del Usuario

MENUS

ABOUT
Unit Status, Owner Information, Network,
Power, and Device information. Owner
information can be entered via the web
interface.
DEVICE INFORMATION
Displays information such as:

Serial Number
 Firmware Version
 UUID/MAC address
SENSORS
Sensor cartridge information on each.
Browse each cartridge for:
 Last date checked
 Expiration Date
 Type of gas sensor

Safe/alarm range

Date of Manufacture

Total run time
More information about each cartridge can be
found in the web interface.
SENSOR CHECK WIZARD
Follow the onscreen prompts to check the
calibration of your sensor cartridges.
NETWORK SETTINGS
Configure a WiFi connection or change
advanced IP settings.
When connecting the GX4 to a network you
may be prompted to enter the network name
(SSID) and the wireless password. If you
do not know these, contact your network
administrator or the documentation that came
with your wireless router.
The IP settings are set automatically by
default. To manually change the settings go
to the network settings menu and enter the
desired settings:
 IP Address
 Subnet Mask

Default Gateway

DNS Address
DATE
To ensure continuity of the logs, the date is
automatically set by the server. The clock
has a dedicated 10 year battery.
TIME
The time can be changed to display the
current time zone and day light savings time.
The logs are recorded in UTC/GMT and
display according to your settings.
UNITS
The units of measure can be changed
between Metric and Imperial.
ALARM AND AUXILIARY
Test the alarm and check the status of the
auxiliary.
DEVICE SOFTWARE
Factory reset of firmware settings.
Note: Logs are not erased during a factory
reset.
15