Preparing The Ceramill Motion 2 - Amann Girrbach ceramil motion 2 Instrucciones De Uso

A P P L I C A T I O N
4.2

Preparing the Ceramill Motion 2

When the Ceramill Motion 2 is set up for dry
E N
processing:
▷ Convert the Ceramill Motion 2 for wet process-
ing (see Ceramill Motion 2 Operating Instruc-
tions)
▷ Disengage lever [3] and pull off the transparent
splash guard [1] toward the front.
1
Fig. 3
1 Splash guard
2 Blank holder
3 Lever
A Operation button
8
2
3
A
To remove the blank holder:
▷ With the door closed, press operation button
[A] for at least three seconds.
The current tool is placed down and the blank
holder [2] returns to the change position.
1
Fig. 4
1 Fastening screw for blank holder
2 Blank holder
▷ Loosen fastening screw [1].
▷ Pull off the blank holder toward the right.
▷ Clean the locating bore and surfaces.
Blank holders not in use can be placed on
the storage rack and thus securely stored.
Fig. 5
2