Inserting The Blank Holder For Glass Ceramic Blanks; Starting The Grinding Program; Warranty/Exclusion Of Liability; Download Infos - Amann Girrbach ceramil motion 2 Instrucciones De Uso

4.3 Inserting the Blank Holder for
Glass Ceramic Blanks
▷ Check the pin of the blank holder and clean if
required.
▷ Insert the blank holder with the pin to the stop
in the locating bore.
Fig. 6
NOTICE:
Inaccurate working results or damage to the
blank-holder fixture possible!
▷ Tighten fastening screw [1] with a torque of
4 Nm.
The torque wrench included in the delivery
scope of the Ceramill Motion 2 is appropriately
set.
▷ Tighten fastening screw [1] with with the torque
wrench.
W A R R A N T Y / E X C L U S I O N O F L I A B I L I T Y
> 0
0
4.4

Starting the Grinding Program

▷ Briefly press operation button [A].
The machine advances to the starting position.
▷ Mount the transparent splash guard [1] to the
extraction opening and lock it in place with
lever [3].
▷ Transfer the milling file for wet processing.
5 Warranty/Exclusion of
Liability
Application-technical recommendations, whether
given orally, in writing or in the course of practical
training, are guidelines. Our products are subject
to continuous further development. Subject to
changes in handling and composition.
6

Download Infos

Further instructions/manuals and video tutorials
can be downloaded under
www.ceramill-m-center.com
www.amanngirrbach.com
and/or
.
E N
9