Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
www.trapp.com.br
The motor model with 16 HP has electrical starting,
in this case it is not necessary to pull the cable of the
retractable start.
Image merely illustrative
Position 1
Figure 6
The motor shall be operated only if the lever belt tensioner is in relief position 1, according to the Figure
6, without stressing the belt as pictured above, then in this position the motor is operated after reaching its
maximum speed push the lever of the belt tensioner in the position 2 according to the Figure 7, by checking
if the belts will remain tensioned according with the operation of the crusher. The belt tensioner lever can
only tighten when the motor is under operation, if the motor is switched off damages may occur to the motor.
If you notice any unusual situation when turning the belts, stop the motor and contact a TRAPP Technical
Assistant.
Image merely illustrative
Posição 1
Position 2
Figure 7
Belt Tensioner Start
As soon as the motor starts to warm up, return the
choke lever to the starting position, accelerate the
motor to the ideal working speed.
57
Publicidad
Tabla de contenido
